our_factory.jpg 381654728.jpg STRAPPING_BANNER.jpg Banner4.jpg banner5.jpg

50mm Ratchet Lashing with BSC Ergo-Ratchet

50mm Ratchet Lashings with Ergo-ratchet with BSC function, patented, LC: 2500daN/5000daN, according to EN 12195-2, with GS certificate approvaled by TUV SUD.

GS certificate for ratchet lashing belt  

More details

Inquiry

Bookmark and Share

Ergo Ratchet with BSC functions for 50mm ratchet lashing belts

 Ergo Ratchet with BSC function

                  

        Double J hook for 50mm ratchet lashing                       

double J hook for 50mm ratchet lashing

 


 

 

 

 

 

 

 

 

 

Technical Data:

Belt Material: 100% Polyester                               application of 50mm ratchet lashing belt

Belt Width: 50mm

Belt Color: Red/Yellow/Orange/Blue/Green+ 5 black strips

Belt Strength: 7500daN 

LC: 2500daN/5000daN

STF: 500daN

Length: 6m/ 8m/9m/10m/12m/15m

Fixed  end Length: 0.5m

Packing: each piece in shrink film

Features:

* Meet all requirements of EN 12195-2

* All functions of the long handle pull type Ergo-ratchet

* Higher pre-tension(STF=500 daN) due to the fine teeth and the long handle of ratchet

* In accordance with the law of physical sport, more labor-saving due to the pulling design

* Various end fittings are available to suit specific lashing needs Hooks for 50mm ratchet lashings

* The locking mechanism for load transport extra security

* Two functions on one ratchet:

a) Quick releasing function, the same release as normal ratchet   

b) BSC-function, belt-slip-control, releasing the pre-tension step by step, to ensure stability of the load prior to final release

For example, if 10 pieces lashing straps are used to secure the load on a truck. At the destination, the first 8 piees or 9 pieces lashings straps should be released by the fast release function of our BSC ratchet, just as the normal ratchet, without any problem. The last 1 or 2 pieces lashing straps should be released by the BSC function(step-by-step release), in order to avoid any risk of accident.

Warning:

* Not for lifting!

Only trained and authorized persons are permitted to use the ratchet tie down. 

Caution:

* Do not exceed the lashing capacity indicated by the manufacturer! In the case of improper use, the transported articles can not be secured correctly and may cause damages.

* Protect the webbing against sharp edges!

* Examine the wear or damages of the web lashing before each use. If any wear and damages at the webbing or damages at the metal parts, do not use the ratchet tie down any longer.

* Make sure the webbing is fitted without twists and in such a way that may influence the rated lashing capacity, otherwise it may cause damages.


29 other products in the same category: