986663676.png our_factory.jpg STRAPPING_BANNER.jpg Banner4.jpg banner5.jpg

50mm Ratchet Lashing with Ergo-Ratchet L375

50mm Ratchet Lashings with Ergo-ratchet L375, LC: 2500daN/5000daN, according to EN 12195-2, with GS certificate approvaled by TUV Rheinland.

GS certificate for 50mm ratchet lashing with ergo ratchet

More details


Bookmark and Share

Ergo Ratchet L325 for 50mm ratchet lashing belts

 Ergo Ratchet L375 for 50mm cargo lashing


        Double J hook for 50mm ratchet lashing                       

double J hook for 50mm ratchet lashing











Technical Data:

Belt Material: 100% Polyester                               application of 50mm ratchet lashing belt

Belt Width: 50mm

Belt Color: Red/Yellow/Orange/Blue/Green+ 5 black strips

Belt Strength: 7500daN 

LC: 2500daN/5000daN

STF: 550daN

Length: 6m/ 8m/9m/10m/12m/15m

Fixed  end Length: 0.5m

Packing: each piece in shrink film


* Meet all requirements of EN 12195-2

* Higher pre-tension(STF=550 daN) due to the fine teeth and the long handle(handle length 375mm)

* Various end fittings are available to suit specific lashing needs Hooks for 50mm ratchet lashings

* More working efficient, because 6 teeth of the ratchet are moved by a cycle of handle pushing(3 teeth of the ratchet are moved by a cycle of handle pushing of the normal ratchet)


* Not for lifting!

Only trained and authorized persons are permitted to use the ratchet tie down. 


* Do not exceed the lashing capacity indicated by the manufacturer! In the case of improper use, the transported articles can not be secured correctly and may cause damages.

* Protect the webbing against sharp edges!

* Examine the wear or damages of the web lashing before each use. If any wear and damages at the webbing or damages at the metal parts, do not use the ratchet tie down any longer.

* Make sure the webbing is fitted without twists and in such a way that may influence the rated lashing capacity, otherwise it may cause damages.

29 other products in the same category: