986663676.png our_factory.jpg STRAPPING_BANNER.jpg Banner4.jpg banner5.jpg

50mm Ratchet Lashing with Ergo-Ratchet XES

50mm Ratchet Lashings with Ergo-ratchet XES, LC: 2500daN/5000daN, according to EN 12195-2.

More details

Inquiry

Bookmark and Share

Ergo Ratchet XES for 50mm ratchet lashing belts

 Ergo Ratchet XES

                  

        Double J hook for 50mm ratchet lashing                       

double J hook for 50mm ratchet lashing

 


 

 

 

 

 

 

 

 

 

Technical Data:

Belt Material: 100% Polyester                               application of 50mm ratchet lashing belt

Belt Width: 50mm

Belt Color: Red/Yellow/Orange/Blue/Green+ 5 black strips

Belt Strength: 7500daN 

LC: 2500daN/5000daN

STF: 350daN

Length: 6m/ 8m/9m/10m/12m/15m

Fixed  end Length: 0.4m/0.5m

Packing: each piece in shrink film

Features:

* Meet all requirements of EN 12195-2

* The same pre-tension force(STF=350daN) as normal ratchet, but with the ergo design, can save more labor than the normal push type ratchet.

* More economic for different market demand

* Various end fittings are available to suit specific lashing needs Hooks for 50mm ratchet lashings

Warning:

* Not for lifting!

Only trained and authorized persons are permitted to use the ratchet tie down. 

Caution:

* Do not exceed the lashing capacity indicated by the manufacturer! In the case of improper use, the transported articles can not be secured correctly and may cause damages.

* Protect the webbing against sharp edges!

* Examine the wear or damages of the web lashing before each use. If any wear and damages at the webbing or damages at the metal parts, do not use the ratchet tie down any longer.

* Make sure the webbing is fitted without twists and in such a way that may influence the rated lashing capacity, otherwise it may cause damages.


29 other products in the same category: