986663676.png our_factory.jpg STRAPPING_BANNER.jpg Banner4.jpg banner5.jpg

25mm Ratchet Lashing with S hooks-500kg

25mm Ratchet Lashings with S Hooks, LC: 250daN/500daN, according to EN 12195-2, with GS certificate approvaled by TUV SUD.

GS certificate for ratchet lashing belt  

More details


Bookmark and Share

 ratchet and hooks for 25mm lashings

Technical Data:

Belt Material: 100% Polyester                               application of 25mm ratchet lashing belt

Belt Width: 25mm

Belt Color: Red/Yellow/Orange/Blue/Green

Belt Strength: 750daN 

LC: 250daN/500daN

Length: 5m/ 6m/8m

Fixed  end Length: 0.3m/0.4m/0.5m

Packing: each piece in shrink film

This ratchet cargo lashings are used for securing truck loads, tying down loads while transporting, shifting or moving them. They have replaced traditional jute ropes, chains and wires used for transportion and for a vairety of other applications securing truck loads. The use of cargo lashings can reduce the chance of load damage and also protect other traffic party.

The main advantage of ratchet cargo lashings are:

* Load restrain using a tension device(ratchet)

* Effective and safe control of loads during transportation

* Extremely quick and efficient tie down and release the load thus saving time

* No damage to the load being tied down


* Not for lifting!

Only trained and authorized persons are permitted to use the ratchet tie down. 


* Do not exceed the lashing capacity indicated by the manufacturer! In the case of improper use, the transported articles can not be secured correctly and may cause damages.

* Protect the webbing against sharp edges!

* Examine the wear or damages of the web lashing before each use. If any wear and damages at the webbing or damages at the metal parts, do not use the ratchet tie down any longer.

* Make sure the webbing is fitted without twists and in such a way that may influence the rated lashing capacity, otherwise it may cause damages.

29 other products in the same category: